MB 30

Stowage

Plasticized pallet - single-use
(for all products expt ARF, RIFLEX, LF-100 and LM-100)

Sprayed concrete suitable for for usage on masonry, concrete walls and EPS/XPS based permanent formworks, for both exterior and interior applications.
  • 25 kg Bags;
  • 1600 kg Pallets (64 bags).

1 year from the manufacturing date, if stored in a dry place on the unopened original package.

Performance dry mortar, consisting of selected aggregates, hydraulic binders and additives.

  • Preparation of the surface
    • The surface must be clean, degreased and the armature must be pre-applied, respecting the specified covering;
    • Ensure the cohesion of the surface.
  • Mixture
    • Add the amount of water indicated on the bag;
    • Thoroughly mix the added water to each bag.
  • Application
    • The mortar must be applied within 1 hour of mixing, and no further water may be added.
  • Do not apply in extreme temperatures <5º C and >30º C.
  • It should not be applied to icy surfaces, and strong winds and intense sun exposure should be avoided;
  • Do not add other products;
  • Each layer of render must be between 2 and 3 cm thick;
  • We recommended watering the product 24 hours after application and this watering should be repeated at 48 hours and 72 hours;
  • Avoid breathing dust and contact with skin and/or eyes;
  • Refer to the Data Sheet and Safety Data Sheet for more detailed information.
  • Compressive strength (N/mm2) ≥25
  • Capillary water absorption [kg/(m2.min0,5)] ≤0,1
  • Mixing water 16 ± 1 % 
  • Average yields (kg/m2 per cm thickness) 16 ± 1