Flexible Tile Grout

Product to fill joints up to 15 mm wide, in ceramic tiles and natural stone, on interior and exterior walls and floors. Coloured material. It incorporates hydrofuge additives for a better joint seal.

Filling joints up to 15 mm wide, in ceramic tiles and natural stones, on interior and exterior walls and floors. Coloured material.

• Bags of 5 kg in boxes of 5 bags;
• Available in a variety of colours.

3 years from the manufacturing date, if stored in a dry place on the unopened original package.

Tile grout, consisting of cement, selected aggregates, and special additives.

• Preparation of the surface
  • Before applying, check that the joints are clean and dry along their length and depth.
• Preparation of the surface
  • Mix with 1.75 litres of water per 5kg bag with a mechanical mixer, at a slow pace, until you get a uniform paste.
  • Apply immediately.
• Application
  • Apply the grout diagonally with a rubber float or gun until the joints are completely filled. Remove surplus product with the same float;
  • Wait for the joint to harden to the touch (when the grout’s shine disappears);
  • Clean the surface by scrubbing with a sponge or slightly damp mop;
  • Do not use too much water to prevent blooming.

• Do not apply in extreme temperatures: <5º C and >30º C.
• It should not be applied to icy surfaces, and strong winds and intense sun exposure should be avoided;
• Do not add other products;
• Do not remix the product once the hardening process has started;
• Wait for at least 24 hours on walls after bonding before applying (48 hours on floors);
• Use plastic tile spacers to ensure correct application;
• Avoid breathing dust and contact with skin and/or eyes;
• Refer to the Data Sheet and Safety Data Sheet for more detailed information.

• Abrasive strength (mm³) ≤1000
• Flexural strength after dry storage (N/mm²) ≥3,5
• Compressive strength after dry storage (N/mm²) ≥15
• Shrinkage (mm/m) ≤2
• Water absorption after 30 minutos (g) ≤2
• Water absorption after 240 minutes (g) ≤5