CIMPOR CIMPro Grey Cement Adhesives

Cement based Grey Tile Adhesive for bonding small, ceramic tiles and natural stone on interior walls and floors. Suitable for outdoor bonding, in situations with low technical requirements.
  • 25 kg Bags;
  • 1600 kg Pallets (64 bags).

1 year from the manufacturing date, if stored in a dry place on the unopened original package.

Cement based Tile Adhesive, consisting of cement, selected aggregates and special additives.

  • Preparation of the surface
    • The surface must be flat, clean, degreased, and dry;
    • Assess the water absorption of the surface.
  • Preparation of the surface
    • Mix with 5 litres of water per 25 kg bag with a mechanical mixer until you get a uniform paste;
    • Leave to stand for 2 to 3 minutes before applying.
  • Application
    • Spread the Cement based Tile Adhesive over the surface using a notched trowel to obtain a regular and uniform thickness, always in small sections (1 to 2 m2);
    • Lay the tiles in the required position and press until the grooves of the adhesive disappear. The tile/ adhesive contact surface should be greater than 80%;
    • Gaps of at least 2 mm must be left between tiles, indoors and at least 6 mm outdoors. Tile grout can be applied between 24 and 48 hours after bonding.
  • Do not apply in extreme temperatures: <5º C and >30º C.
  • It should not be applied to icy surfaces, and strong winds and intense sun exposure should be avoided;
  • Once mixed, it can be applied up to 1 hour after mixing, but this time can be shorter if the weather conditions are dry and/or hot;
  • Adjust the size of the sections where the adhesive is applied to the weather conditions at the time of application to prevent premature drying of the product;
  • Do not add any more water after mixing;
  • Maximum thickness: 6 mm;
  • Do not apply on plaster or stucco;
  • Avoid breathing dust and contact with skin and/or eyes;
  • Refer to the Data Sheet and Safety Data Sheet for more detailed information.
  • Initial adhesion (28 days) (N/mm2) ≥0,5
  • Adhesion after immersion in water (28 days) (N/mm2) ≥0,5
  • Adhesion after heating (28 days) (N/mm2) ≥0,5
  • Adhesion after freezing/unfreezing (28 days) (N/mm2) ≥0,5
  • Slippage (mm) ≤0,5
  • Open time (min) 20
  • Average yields (depending on thickness) (kg/m2) 3 a 6