CIMPOR CIMFlex 50 White Cement Adhesive

Flexible Cement based White Tile Adhesive for bonding small and medium-sized, ceramic tiles and natural stone, on both interior and exterior walls and floors.

• 25 kg Bags.
• 1600 kg Pallets (64 bags).

1 year from the manufacturing date, if stored in a dry place on the unopened original package.

Cement based Tile Adhesive, consisting of cement, selected aggregates and special additives.

• Preparation of the surface
  • The surface must be flat, clean, degreased, and dry;
  • Assess the water absorption of the surface.
• Preparation of the surface
  • Mix with 5 litres of water per 25 kg bag with a mechanical mixer until you get a uniform paste.
  • Leave to stand for 2 to 3 minutes before applying.
• Application
  • Spread the Cement based Tile Adhesive over the surface using a notched trowel to obtain a regular and uniform thickness, always in small sections (1 to 2 m²);
  • Lay the tiles in the required position and press until the grooves of the adhesive disappear. The tile/ adhesive contact surface should be greater than 80%.
  • Gaps of at least 2 mm must be left between tiles, indoors and at least 6 mm outdoors. Tile grout can be applied between 24 and 48 hours after bonding.

• Do not apply in extreme temperatures: <5º C and >30º C.
• It should not be applied to icy surfaces, and strong winds and intense sun exposure should be avoided;
• Once mixed, it can be applied up to 1 hour after mixing, but this time can be shorter if the weather conditions are dry and/or hot;
• Adjust the size of the sections where the adhesive is applied to the weather conditions at the time of application to prevent premature drying of the product;
• Do not add any more water after mixing;
• Maximum thickness: 6 mm;
• Avoid breathing dust and contact with skin and/or eyes;
• Refer to the Data Sheet and Safety Information Sheet for more detailed information.

• Initial adhesion (28 days) (N/mm²) ≥1,0
• Adhesion after immersion in water (28 days)(N/mm²) ≥1,0
• Adhesion after heating (28 days) (N/mm²) ≥1,0
• Adhesion after freezing/unfreezing (28 days) (N/mm²) ≥1,0
• Slippage (min) ≤0,5
• Open time (min) 30
• Transverse deformability(mm) ≥2,5
• Average yields (depending on thickness) (kg/m²) 3 to 6