Promoter of adhesion, before the application of mortars, concrete, and tile adhesives.
  • Bottles of 1 and 5 liters.

2 years from the manufacturing date, in its original sealed packaging, in a dry place, protected from sunlight, and at temperatures between 5°C and 30°C.

Ready-to-use product, composed of binding agents, water, and chemical admixtures.

1. Preparation of the surface

  • Stir well before applying.
  • Ready to apply with a roller or brush.
  • Clean rusty surfaces to remove any non-adherent rust and traces of grease.

2. Application

  • Apply manually with a brush, roller, or brush, in a thick and uniform manner, ensuring that the surface is fully covered.
  • During application, it should be periodically stirred.
  • Wait for drying, which should feel sticky to the touch, before applying mortars/adhesives/concrete.
  • Do not apply in extreme temperatures: <5ºC and >30ºC.
  • Do not apply on frozen surfaces and avoid strong winds and exposure to intense sunlight.
  • Do not add other products.
  • Never add water.
  • Refer to the Technical Data Sheet and Safety Data Sheet for more detailed information.

Drying Time: 24 to 48 hours

pH, 20ºC: 4 to 4,5

Yields: 0,15 to 0,20 litres/m2