Este website utiliza cookies. Ao continuar a navegação está a aceitar a sua utilização.
Caso pretenda saber mais, consulte a nossa política de privacidade. Recusar

CEM II/B-L 32,5 N
Downloads

25 ton truck with self discharge means and properly sealed
Bulk ±25 tonnes
*For exportation purpose, please contact our Sales Department

Plasticized pallet - single-use
72 Bags of ±25 kg - 1800 kg
*For exportation purpose, please contact our Sales Department

(1) 71 Bags of 25 kg - 1775 kg
(2) 70 Bags of 25 Kg - 1750 kg
(1) Alhandra and Souselas | (2) Loulé
*For exportation purpose, please contact our Sales Department
65% ≤ Clinker ≤ 79%;
21% ≤ Limestone ≤ 35%;
Additional minor constituents ≤ 5%;
Calcium sulfate as setting regulator.
- Chemical
- Sulfate content (SO3) ≤ 3,5%
- Chloride content (Cl-) ≤ 0,10%
- Physical
- Initial setting time ≥ 75 min;
- Soundness ≥ 10 mm.
- Mechanical
- Compressive strength
- Minimum values
- 7 days: 16,0 MPa;
- 28 days: 32,5 MPa.
- Reinforced concrete
- Particularly suitable for strength classes in the range of C12/15 to C25/30;
- Precast concrete products
- Reinforced concrete with no major requirements;
- All types of plain concrete precast elements (paving blocks, paving flags, kerb units, masonry blocks, etc)
- Mass concrete;
- Plain concrete used in foundations or non structutal elements;
- All kinds of mortars;
- Soil stabilization.
Minimum growth curve

- Low early strengh development;
- Continuous strength development until 28 days;
- High workability in mortars and concretes even with low water/cement ratio.
- Attend the standard minimum cement content and maximum water/cement ratio;
- Provide adequate protection and cure according to corresponding standards;
- Keep framework and scaolding in place until required strength is obtained;
- Under aggressive environments, strictly follow standard recommendations and technical information about the subject.
- Concrete in cold weather.
- Wear proper protective clothing, gloves and eye/face protection equipment;
- When bagged it contains Chromium (VI) reducing agent. Its expiration date is two months after the bagging date, as long as the storage conditions stated in the bag are
respected; - The production of this cement represents a decrease of CO2 emissions;
- For more information, check the Safety Data Sheet, available at www.cimpor.com
