Este website utiliza cookies. Ao continuar a navegação está a aceitar a sua utilização.
Caso pretenda saber mais, consulte a nossa política de privacidade. Recusar

Lightweight Concrete - IZOBET

It is transported in truck mixers and placed in the application area by direct discharge or pumping.

In the production of IzoBet, selected and stored raw materials are used, the properties of which are verified through national and international standards. The process, from raw material production to the application of the concrete on site, is 100% controlled.
Cement: CEM I and CEM II type cements can be used.
Aggregates: These are obtained from selected sources in accordance with the specifications of Standard NP EN 12620.
Mineral Additions/Chemical Admixtures: Mineral additions suitable for concrete use are used, as well as a new generation of uniquely developed chemical admixtures that combine the binder with the aggregates used.
- Structural steel coating from fire and corrosion protection.
- Thermal insulation.
- Acoustic insulation.
- Interior and exterior wall construction.
- General insulation of walls and floors.
- LEED-certified projects.
- Concrete must be placed properly;
- No cold joints should be created in the application of the concrete;
- Appropriate protective precautions must be taken depending on the weather conditions after the application of the concrete;
- The concrete must be protected against external factors such as wind, cold, and intense heat in order to prevent possible cracking;
- Proper curing and maintenance of the concrete must be performed.
Compared to the current concrete;
- Lower coefficient of heat and sound conductivity
- Optimize construction costs by reducing the structure's self-weight
- Create significant advantages in the design of foundation-directed loads, especially in buildings with many storeys
Compressive Strength Class: < LC25/28
Consistence Class: ≥ S3
Consistency Maintenance Time: ~ 1 hour
Air content: 2-20 %
Max. density: 2000 kg/m3