Este website utiliza cookies. Ao continuar a navegação está a aceitar a sua utilização.
Caso pretenda saber mais, consulte a nossa política de privacidade. Recusar

PAC - Preplaced Aggregate Concrete
New Constructions
Concrete is a material formed by thoughtful mixture of cement, water, aggregates, with or without the incorporation of admixtures and additions of various natures. However, this "classic" definition does not cover all possible variations arising from the manufacturing process, the aggregates size, the density, the consistence, and placement.
Examples of the latter include roller-compacted concrete and Pre-placed Aggregate Concrete (PAC). The main difference between PAC and traditional concrete is that the final mixing of its components takes place in forms and not in the mixer. In fact, with this process, the aggregate is carefully placed in the form, and only then, cement mortar is poured in. Thanks to its high fluidity, the mortar fills the spaces between the aggregates, producing a monolithic mass.

CIMPOR - along with the Laboratório Nacional de Engenharia Civil (LNEC) - was invited to join a project run by EDP commited to develop new sustainable construction solutions using this technique.

Laboratory Test - Mortar pouring
The project's first stage focused in defining the cement mortar composition which was the task of LNEC (Departamento de Materiais de Construção).
The cement selected for this study was CIMPOR’s CEM II/B-L 32.5 N, manufactured in Souselas plant

Laboratory Test – South side face (mortar rising in the lower section)
During the second stage, a laboratory test was conducted at Faculdade de Engenharia da Universidade do Porto, under EDP and LNEC supervision involving pouring of a cube prototype with 2m long edge which was intended to reproduce a large, poured concrete mass.
In October 2010, considering the encouraging results of the previous stages of testing, this technique was used in Portugal for the first time during the construction of the downstream cofferdam of the Baixo-Sabor Hydroelectric power scheme main dam. At this stage, EDP and LNEC were joined by a third entity, Baixo-Sabor ACE, which was the contractor in charge of building this venture.

Baixo-Sabor Hydroelectric power plant - Downstream cofferdam of the upstream facility
As confidence was continuously growing, the construction (by July 2011) of a block of the downstream facility using this technique, was the logical corollary of this process.

Baixo-Sabor Hydroelectric power plant - Downstream cofferdam of the facility
What is PAC?
The acronym PAC stands for Pre-placed Aggregate Concrete, a type of concrete where maximum size <150 mm coarse aggregates, which are traditionally used in dams, are previously placed into the formwork leaving about 30% of voids which are later filled with mortar.
Although it may seem that voids would be left unfilled, some preliminary precautions can be taken to put aside any concerns regarding that.Regarding coarse aggregate, previous washing is required in order to enhance mortar adherence and previous mixing of the different fractions of gravel in order to reduce the size of the voids. Too large could only be filled with mortar what would lead to lack of integrity of the concrete element and nasty consequences.

Consistence of fresh mortar test
The mortar should be fluid enough to fill all voids and at the same time cohesive enough to prevent segregation.
On the formwork side, it must be sufficiently watertight as to retain the mortar and minimise any loss of material through tricky openings. Taking into account this precautions , the porosity of PAC is comparable to that of conventional concrete, therefore providing similar features and performance.
One of the most remarkable advantages of PAC is that it allows coarse aggregate to be placed directly at the forefront of the works, which eliminates the need for intermediate transport to a concrete plant where it would be mixed with the other concrete constituents. This specific feature of PAC offers an additional benefit in terms of saving space at concrete plants as PAC enables discarding storage, transport, and weighing systems of gravel. These benefits also come along with significant environmental and economic advantages, leading PAC to be seen as a viable alternative to traditional concrete in works that require high-volume concrete placing as in the case of dams.

Baixo-Sabor Hydroelectric power plant - Downstream cofferdam of the upstream facility
CIMPOR, who has been part of the process from the very beginning and has been involved in every stage, whether supplying materials or providing information vital for the technical development of this technique praises EDP and LNEC as project developpers, and rejoices with the general outcome, which uncovers new technical perspectives on the use of cement in concrete manufacturing, as well with the selection of CIMPOR's CEM II/B-L 32,5 N cement in the project.
Produtos Usados
CEM II/B-L 32,5 NLocation
Baixo-Sabor
October 2010
Constructive solution used for the first time in Portugal
Mentors
EDP and LNEC
Other projects



