ARP 12

Downloads

Stowage

Plasticized pallet - single-use
(for all products expt ARF, RIFLEX, LF-100 and LM-100)


Floor screed, for both exterior and interior floors, not intended as wearing surfaces.
  • 25 kg Bags;
  • 1600 kg Pallets (64 bags);
  • Bulk supply, with silos of capacity of approximately 30 ton (*).
  • Bagged: 1 year from the manufacturing date, if stored in a dry place on the unopened original package;
  • Bulk: 3 months after the date of unloading at the work silo (*).

(*) Only available in mainland Portugal

Performance dry mortar, consisting of selected aggregates, hydraulic binders and additives.

  • Preparation of the surface
    • The surface should be clean and degreased; 
    • Wet the surface properly so that it is neither too wet nor too dry;
  • Mixture
    • Add the amount of water indicated on the bag;
    • Thoroughly mix the added water to each bag.
  • Application
    • The mortar must be applied within 1 hour of mixing, and no further water may be added.
  • Do not apply in extreme temperatures: <5º C and >30º C.
  • It should not be applied to icy surfaces, and strong winds and intense sun exposure should be avoided;
  • Do not add other products;
  • The total thickness must be at least 3 cm;
  • Avoid breathing dust and contact with skin and/or eyes;
  • Refer to the Data Sheet and Safety Data Sheet for more detailed information.
  • Compressive strength (N/mm2) ≥12
  • Flexural strength (N/mm2) ≥2
  • Hardened density (kg/m3) 1950 ± 200
  • Average yields (kg/m2 per cm thickness) 19 ± 2