AE

Base coat render, for filling and repairing old walls, suitable for renovation and restoration work, both indoors and outdoors.

25 kg Bags;
1600 kg Pallets (64 bags);
Bulk supply, with silos of capacity of approximately 30 ton (*).

• Bagged: 1 year from the manufacturing date, if stored in a dry place on the unopened original package;
• Bulk: 3 months after the date of unloading at the work silo (*).

(*) Only available in mainland Portugal

Performance dry mortar, consisting of selected aggregates, hydraulic binders and additives.

• Preparation of the surface
  • The surface should be clean and degreased; 
  • Wet the surface properly so that it is neither too wet nor too dry.
• Mixture
  • Add the amount of water indicated on the bag;
  • Thoroughly mix the added water to each bag.
• Application
  • The mortar must be applied within 1 hour of mixing, and no further water may be added.

• Do not apply in extreme temperatures: <5º C amd >30º C.
•  It should not be applied to icy surfaces, and strong winds and intense sun exposure should be avoided;
• Do not add other products;
• Each layer of render must be between 1.5 and 2.0 cm thick;
• We recommended watering the render 24 hours after application and this watering should be repeated at 48 hours and 72 hours;
• Avoid breathing dust and contact with skin and/or eyes;
• Refer to the Data Sheet, Safety Data Sheet, our Guide: “Repair of old masonry, brick, sand and lime walls,” or contact us.

• Compressive strength(N/mm²) ≥6
• Capillary water absorption [kg/(m².min^0,5)] ≤0,40
• Hardened density (kg/m³) 1500 ± 200
• Average yields (kg/m² per cm thickness) 15 ± 1