ACHF

Fine Finished Hydraulic Lime Render, suitable for renovation and restoration work, both indoor and outdoor.

• 25 kg Bags;
• 1600 kg Pallets (64 bags).

1 year from the manufacturing date, if stored in a dry place on the unopened original package.

Performance dry mortar, consisting of selected aggregates, hydraulic binders and additives. Cement-free.

• Preparation of the surface
  • The surface should be clean and degreased;
  • Wet the surface properly so that it is neither too wet nor too dry;
• Mixture
  • Add the amount of water indicated on the bag;
  • Thoroughly mix the added water to each bag.
• Application
  • The mortar must be applied within 1 hour of mixing, and no further water may be added.

• Do not apply in extreme temperatures: <5º C and >30º C.
• It should not be applied to icy surfaces, and strong winds and intense sun exposure should be avoided;
• Do not add other products;
• The total thickness should not be less than 2 mm or more than 5 mm;
• We recommended watering the render 24 hours after application and this watering should be repeated at 48 hours and 72 hours;
• Avoid breathing dust and contact with skin and/or eyes;
• Refer to the Data Sheet, Safety Data Sheet, our Guide: “Repair of old masonry, brick, sand and lime walls,” or contact us.

• Compressive strength (N/mm²) ≥0,4
• Capillary water absorption [kg/(m².min^0,5)] ≤0,40
• Hardened density (kg/m³) 1500 ± 200
• Average yields (kg/m² per cm thickness) 15 ± 1