ABRF

Fine Finished Skim Coat Rendering mortar suitable for thin layer manual rendering, on pre-rendered walls, in both external and internal walls.

• 25 kg Bags;
• 1600 kg Pallets (64 bags).

1 year from the manufacturing date, if stored in a dry place on the unopened original package.

Performance dry mortar, consisting of selected aggregates, hydraulic binders, and additives.

• Preparation of the surface
  • The support must be clean and degreased;
  • Wet the surface properly so that it is neither too wet nor too dry;
• Mixture
  • Add the amount of water indicated on the bag;
  • Thoroughly mix the added water to each bag.
• Application
  • The mortar must be applied within 1 hour of mixing, and no further water may be added.

• Do not apply in extreme temperatures: <5º C and >30º C.
• It should not be applied to icy surfaces, and strong winds and intense sun exposure should be avoided;
• Do not add other products;
• Do not use as a base mortar;
• We recommended watering the render 24 hours after application and this watering should be repeated at 48 hours and 72 hours;
• Avoid breathing dust and contact with skin and/or eyes;
• Refer to the Data Sheet and Safety Data Sheet for more detailed information.

• Compressive strength (N/mm²) ≥3,5
• Total thickness (minimum and maximum) (mm) 3 to 6
• Capillary water absorption [(kg/(m².min^0,5)] ≤0,20
• Hardened density (kg/m³) 1600 ± 200
• Average yields (kg/m² per mm thickness) 1,5 ± 0,1